What is Sodium Fusion Test?
Sodium Fusion Test (Lassaigne Test) is used for the conversion of heteroatoms such as nitrogen, sulphur and halogens from their covalently bonded state in organic compounds into water-soluble ionic sodium salts.
To achieve this, the sample undergoes an intense heating process with highly reactive metallic sodium. This direct sodium fusion forcibly breaks the stable organic framework, yielding an alkaline, inorganic solution known as the sodium fusion extract (or Lassaigne’s extract). It is this resulting extract that is then used to definitively identify the specific elements present in the organic compound.
Elements Detected Using the Test
During the Sodium Fusion Test, specific elements present in the organic compound react with the sodium to form distinct, detectable ionic salts:
Classical test and modern method
The sodium fusion test is the classical chemical method for detecting nitrogen, sulfur and halogens. Mass spectrometry, the modern instrumental method, detects the same elements from the molecular ion peak and its isotope peaks. Mass spectrum interpretation
|
Feature |
Description |
|
Test Name |
Sodium Fusion Test (Lassaigne Test) |
|
Purpose |
Detection of heteroatoms in organic compounds |
|
Principle |
Conversion of covalent compounds into ionic sodium salts |
|
Elements Detected |
Nitrogen, Sulfur, Halogens (N, S, Cl, Br, I) |
|
Reagent Used |
Metallic Sodium |
|
Product Formed |
Water-soluble sodium salts |
|
Application |
Elemental analysis of organic compounds |
Principle of the Sodium Fusion Test
The core principle of the sodium fusion test is the chemical transformation of unreactive covalent bonds into highly detectable ionic bonds.
The Problem: Organic heteroatoms (nitrogen, sulfur, halogens) are locked in tight covalent linkages that cannot be directly detected using aqueous inorganic reagents due to their covalent bonding.
The Solution: Extreme heat forces these stubborn elements to convert into water-soluble, reactive ionic salts
Why is sodium used in the Lassaigne test?
The answer lies in its uniquely low melting point and extreme chemical reactivity.
- The Action: Sodium acts as a powerful reducing agent. Upon heating, it melts and breaks covalent bonds and converts heteroatoms into ionic sodium salts.
- The Conversion: It donates electrons to the hidden heteroatoms, locking them into stable, inorganic sodium salts which Enhance the detectability of elements
The Detection Mechanism
The entire detection process relies on the creation of the alkaline sodium fusion test extract.
- Extraction: Plunging the red-hot ignition tube into distilled water shatters the glass and instantly dissolves the newly formed ionic salts.
- Reaction: The liberated, free-floating ions (cyanide, sulfide, halide) can now easily react with standard inorganic reagents.
- Visual Confirmation: These reactions yield unmistakable visual clues to definitively identify the original elements:
What is Sodium Fusion Extract (Lassaigne’s Extract)?
Sodium Fusion Extract, commonly referred to as Lassaigne’s Extract, is the alkaline, aqueous solution prepared during qualitative organic analysis to detect the presence of “extra elements” such as nitrogen, sulfur, and halogens (chlorine, bromine, iodine) in an organic compound.
It is obtained by fusing the organic compound with metallic sodium in a glass ignition tube until red hot, and then plunging the glowing tube into distilled water to dissolve the resulting sodium salts.
Chemical Composition of the Extract
Depending on which elements were present in the original organic compound, the extract will contain specific sodium salts:
|
Element Present in Compound |
Ionic Salt Formed in Extract |
Chemical Formula |
|
Nitrogen (N) + Carbon (C) |
Sodium Cyanide |
NaCN |
|
Sulfur (S) |
Sodium Sulfide |
Na₂S |
|
Halogen (X) |
Sodium Halide |
NaX (where X = Cl, Br, or I) |
|
Nitrogen (N) + Sulfur (S) |
Sodium Thiocyanate |
NaSCN |
Important Note: Fluorine is NOT Detectable by the Standard Sodium Fusion Test
Although fluorine is a halogen, it cannot be detected by the standard silver nitrate test used in the Lassaigne procedure. During fusion, fluorine is correctly converted into sodium fluoride (NaF). However, when silver nitrate (AgNO₃) is added to the extract, the expected silver fluoride (AgF) does not precipitate — because AgF is soluble in water
Preparation of Sodium Fusion Extract (Step-by-Step Procedure)
Before any specific elements can be identified, the covalent organic compound must first be converted into an ionic solution. This is done by preparing the sodium fusion extract (also known as Lassaigne’s extract) using a small glass capillary known as an ignition tube (or fusion tube).
Here is the standard laboratory procedure:
The Result: The clear, alkaline filtrate collected in the beaker is your final sodium fusion extract. This solution is now ready to be used for the detection of nitrogen, sulfur, and halogens!
Chemical Reactions Involved in Sodium Fusion
The core of this entire procedure relies on the intense thermal degradation of the organic sample. During the sodium fusion reaction, the carbon and other constituent elements of the organic compound break apart and recombine with the highly reactive sodium metal. Understanding the specific Lassaigne test reaction for each element is crucial for anticipating the results of the subsequent tests.
i — Formation of Sodium Cyanide
If the organic compound contains nitrogen, the nitrogen atoms fuse with the carbon atoms from the organic backbone and the sodium metal. This results in the sodium cyanide formation, creating a water-soluble ionic salt.
Chemical Reaction: Na + C + N → NaCN
ii — Formation of Sodium Sulphide
When sulfur is present within the organic framework, it reacts directly with the molten sodium. The intense heat drives the sodium sulphide formation, successfully converting the covalently bound sulfur into its free ionic state.
Chemical Reaction: 2Na + S → Na₂S
iii — Formation of Sodium Halides
Halogens (such as chlorine, bromine, or iodine) are frequently found in organic compounds. During fusion, they react vigorously with the metallic sodium, leading to the sodium halide formation (where “X” represents Cl, Br, or I).
Chemical Reaction: Na + X → NaX
iv — Formation of Sodium Thiocyanate
A unique chemical scenario occurs if the organic compound contains both nitrogen and sulfur. Instead of forming cyanide and sulfide separately, these elements fuse together with carbon and sodium, resulting in sodium thiocyanate formation.
Chemical Reaction: Na + C + N + S → NaSCN
Laboratory Note: If an excess amount of sodium metal is used during the initial fusion step, this sodium thiocyanate will decompose into sodium cyanide (NaCN) and sodium sulphide (Na₂S). In this case, the sample will test positive for both nitrogen and sulfur individually rather than as a thiocyanate complex.
Detection of Nitrogen — The Prussian Blue Test
The sodium fusion test for nitrogen (also known as the Lassaigne test for nitrogen) relies on the Prussian blue test, which detects nitrogen in the sodium fusion extract by reacting cyanide ions with iron salts to produce iron(III) hexacyanoferrate(II) — a vivid deep blue complex known as Prussian blue.
The Prussian Blue Test: Reactions
The detection process, famously called the Prussian blue test, occurs in three rapid chemical steps:
Equation: FeSO₄ + 6NaCN → Na₄[Fe(CN)₆] + Na₂SO₄
Equation: 3Na₄[Fe(CN)₆] + 4Fe³⁺ → Fe₄[Fe(CN)₆]₃ + 12Na⁺
Positive Result & Interpretation
Detection of Sulfur — Nitroprusside & Lead Acetate Methods
The sodium fusion test for sulfur (also known as the Lassaigne test for sulfur) is the standard laboratory test for sulfur in organic compounds. It works by detecting the sodium sulfide (Na₂S) that was formed during the initial high-heat fusion process.
To confirm the presence of sulfur, chemists typically rely on one of two highly visual chemical reactions:
Method A: The Sodium Nitroprusside Test
Sodium nitroprusside has the chemical formula Na₂[Fe(CN)₅NO]·2H₂O — a coordination complex in which iron is bonded to five cyanide ligands and one nitrosyl (NO) group.
This is the most common and rapid detection method for sulfur.
Equation: Na₂S + Na₂[Fe(CN)₅NO] → Na₄[Fe(CN)₅NOS] (Forms a deep violet coloration)
Method B: The Lead Acetate Test
This acts as an excellent secondary confirmation test.
Equation: Na₂S + (CH₃COO)₂Pb → PbS + 2CH₃COONa (PbS forms a black precipitate)
Combined Nitrogen and Sulphur Test
Halogen Detection — Silver Nitrate Test
The sodium fusion test for halogens (Lassaigne test for halogens) is used to detect chlorine, bromine, and iodine. It works by identifying the sodium halides (NaX) present in the extract using a heavy metal precipitation method.
Why Nitric Acid is Added Before AgNO₃?
Before testing for halogens, there is a mandatory preparation step: the sodium fusion extract must be boiled with dilute nitric acid (HNO₃).
The Silver Nitrate Test: Reactions
Once the extract is properly acidified and boiled, the detection process relies on silver chemistry:
Equation:
Positive Result & Interpretation
Unlike nitrogen or sulfur, halogens do not produce one single color. Instead, the specific type of halogen is identified by the exact shade of the precipitate and its solubility in ammonium hydroxide (NH4OH):
Observation and Color summary Table
|
Element |
Reagent Used |
Observation |
Color |
Conclusion |
|
Nitrogen |
FeSO₄ + FeCl₃ + H₂SO₄ |
Colored precipitate/solution |
Prussian Blue |
Nitrogen Present |
|
Sulphur |
Sodium Nitroprusside |
Colored complex |
Deep Violet/Purple |
Sulfur present |
|
Sulphur |
Lead Acetate (acidified) |
Heavy precipitate |
Jet Black (PbS) |
Sulfur present |
|
N + S (both) |
FeCl₃ (acidified) |
Colored solution |
Blood Red |
Both N and S present (NaSCN) |
|
Chlorine |
AgNO₃ + HNO₃ |
Curdy precipitate, soluble in NH₄OH |
White (AgCl) |
Chlorine present |
|
Bromine |
AgNO₃ + HNO₃ |
Precipitate, sparingly soluble in NH₄OH |
Pale Yellow (AgBr) |
Bromine present |
|
Iodine |
AgNO₃ + HNO₃ |
Precipitate, insoluble in NH₄OH |
Deep Yellow (AgI) |
Iodine present |
Limitations of the Sodium Fusion Test
Here is the summary of the limitations formatted as a clear, easy-to-read table:
|
Limitation / Issue |
Cause / Explanation |
Common Examples |
|
False Negatives (N without C) |
Compounds lacking carbon cannot form sodium cyanide (NaCN). They require an external carbon source (like starch) for a positive test. |
Hydrazine: NH2NH2 |
|
Premature Loss of Nitrogen |
Heat-sensitive compounds decompose and release nitrogen gas (N2) before the molten sodium can fully react with them. |
Diazonium salts: R-N2+X- |
|
Volatilization |
Compounds with very low boiling points vaporize and escape the open fusion tube before reacting with the sodium. |
Chloroform: CHCl3 |
|
Explosion Hazards |
Highly oxidized or inherently unstable functional groups can trigger dangerous, violent reactions when heated with active sodium metal. |
Polynitro compounds: C6H2(NO2)3OH Organic azides: R-N3 |
|
Safety Risks (Unreacted Na) |
Incomplete fusion leaves unreacted sodium, which reacts violently and exothermically with water during extraction to release flammable hydrogen gas. |
Unreacted Sodium (Na) forming H2 gas |
|
Incomplete Conversion |
If the tube is not heated to a glowing red-hot state, stable ring structures fail to decompose and form detectable ionic salts. |
Pyridine: C5H5N Thiophenes: C4H4S |
Common Errors in the Sodium Fusion Test
Even with a clear procedure, students and technicians frequently encounter issues during qualitative analysis. Understanding the common errors in sodium fusion test procedures is the best way to prevent dangerous laboratory accidents and avoid frustrating false-negative or false-positive results.
Here are the most frequent mistakes made during the fusion process and how they impact the final results:
1. Moisture Contamination (The Safety Hazard)
The most dangerous error is using an ignition tube that is not completely dry. Metallic sodium is violently reactive with water. If moisture is present in the tube, the sodium will immediately react to form sodium hydroxide (NaOH) and highly flammable hydrogen gas (H2). This not only wastes the reagent but poses a severe fire hazard before the fusion even begins.
(2Na + 2H₂O → 2NaOH + H₂↑)
2. Incorrect Heating (Volatilization)
A very common mistake is rushing the heating process. If the tube is heated too rapidly or strongly before the initial gentle melting phase, volatile organic compounds (especially liquids) will simply evaporate and escape the top of the tube before they have a chance to react with the molten sodium. This results in a completely blank extract and a false-negative test.
3. Incomplete Fusion (False Negatives)
The fusion process requires extreme thermal energy. If the laboratory worker fails to heat the bottom of the ignition tube until it is completely red hot, the chemical sledgehammer effect fails. The strong organic covalent bonds will not fully break, meaning no ionic salts (cyanide, sulfide, or halides) are formed, leading to a negative result even when the elements are present.
4. Excess Sodium (Decomposition and Danger)
While you need enough sodium to ensure a complete reaction, using a massive chunk is highly problematic.
Quick Troubleshooting Guide for a Perfect Extract
To guarantee a successful, safe sodium fusion extract every time, follow this mental checklist:
Troubleshooting Table
|
Problem |
Possible Cause |
Solution |
|
No Color Change |
Incomplete fusion |
Repeat fusion |
|
Weak Precipitate |
Insufficient sodium |
Use fresh sodium |
|
False Negative |
Moisture contamination |
Use dry apparatus |
|
Explosion During Fusion |
Excess sodium |
Use a small sodium piece |
Safety Precautions During the Sodium Fusion Test
In sodium fusion practical chemistry, the margin for error is extremely small. You are working with an alkali metal that reacts violently with moisture, alongside intense heat and thermal shock. Adhering strictly to laboratory safety protocols is not optional—it is mandatory to prevent severe accidents.
Here are the critical safety guidelines that must be followed during the procedure:
1. Sodium Handling Protocol
Metallic sodium is extraordinarily reactive and must be treated with immense respect.
2. Strict Eye and Skin Protection
The exact moment the red-hot ignition tube is plunged into distilled water is the most dangerous part of the test.
3. Managing Fire Hazards
Because sodium reacts with water to produce highly flammable hydrogen gas ($2Na + 2H_2O \rightarrow 2NaOH + H_2$), the risk of fire is significant.
4. Proper Waste Disposal
Improper disposal of sodium fusion waste frequently causes delayed laboratory fires.
Where is the Sodium Fusion Test Used? (Applications)
Before chemists use million-dollar machines, they rely on the Lassaigne test for rapid organic qualitative analysis. It serves as the foundational first step for the elemental analysis of organic compounds across multiple scientific disciplines. Here is how different industries use it today:
|
Field / Industry |
Primary Purpose |
Real-World Example |
|
Academic Laboratories |
Teaching & Unknown Identification |
Systematic decoding of “mystery” compounds by chemistry students during qualitative analysis exams. |
|
Research Laboratories |
Structural Verification |
Confirming a successful chemical reaction by checking if a newly synthesized molecule incorporated a target halogen. |
|
Pharmaceutical Analysis |
Drug Profiling & QC |
Ensuring the active ingredients in pain medications or antibiotics (like sulfa drugs) contain the necessary nitrogen or sulfur atoms. |
|
Forensic Chemistry |
Rapid Toxin Screening |
Quickly identifying whether a mystery powder from a crime scene is a deadly organophosphate pesticide or illicit narcotic. |
|
Industrial Quality Control |
Raw Material & Impurity Screening |
Detecting unwanted elemental impurities (such as residual halogens from manufacturing solvents) in bulk chemical products. |
What Are the Reaction Types in Organic Qualitative Analysis? Frequently Asked Questions
Viva Questions
Q. Why is sodium used in Lassaigne’s test?
Sodium is a highly reactive alkali metal that readily cleaves covalent bonds in organic molecules at high temperatures, effectively converting covalently bonded elements into their respective ionic sodium salts (e.g., NaCN, Na₂S, NaX).
Q. Who gives a positive Lassaigne test?
Organic compounds containing nitrogen, sulphur, or halogens (chlorine, bromine, iodine) that successfully convert into cyanide, sulfide, or halide ions during the fusion process.
Q. Can potassium replace sodium in Lassaigne’s test?
Potassium is not typically used because it is significantly more reactive and volatile than sodium, making the fusion process highly dangerous and prone to violent explosions.
Q. What is the sodium fusion test principle?
The principle relies on the thermal decomposition of an organic compound in the presence of a strong reducing agent (sodium), converting covalently bound heteroatoms into stable, water-soluble inorganic sodium salts that can be detected via standard aqueous precipitation reactions.
Q. How do you perform the sodium fusion test for halogens?
The sodium fusion extract is acidified with dilute nitric acid (HNO₃) and boiled to expel any hydrogen cyanide or hydrogen sulfide. Silver nitrate (AgNO₃) solution is then added; the formation of a distinctive silver halide precipitate (white for Cl⁻, pale yellow for Br⁻, yellow for I⁻) confirms the presence of halogens.
Q. What is the sodium fusion test reaction?
The general fusion reactions are:
Na + C + N → NaCN
2Na + S → Na₂S
Na + X → NaX (where X = Cl, Br, I).
Q. What do the sodium fusion test results indicate?
A Prussian blue precipitate indicates nitrogen, A deep violet coloration (sodium nitroprusside test) or a jet-black precipitate (lead acetate test) each independently confirm the presence of sulfur, and a white or yellow precipitate upon adding silver nitrate indicates the presence of specific halogens.
Q. How do you conduct the Lassaigne test for nitrogen?
The sodium extract is boiled with freshly prepared iron(II) sulfate (FeSO₄), cooled, and acidified with dilute sulfuric acid (H₂SO₄). Iron(III) ions (Fe³⁺), either formed by atmospheric oxidation or added directly as FeCl₃, react with the hexacyanoferrate complex to form a Prussian blue or green coloration (ferric ferrocyanide), confirming the presence of nitrogen.
Q. How do you conduct the Lassaigne test for sulphur?
A few drops of sodium nitroprusside solution are added to the sodium fusion extract. The immediate appearance of a deep violet or purple coloration indicates the presence of sulphur due to the formation of sodium thionitroprusside.
Q. Why is the sodium extract boiled with concentrated nitric acid before testing for halogens?
Boiling with nitric acid decomposes and expels any cyanide or sulfide ions present as hydrogen cyanide (HCN) and hydrogen sulfide (H₂S) gases. If left in the extract, these ions would precipitate with silver nitrate and obscure the halogen test results.
Q. How do you detect nitrogen and sulphur if both are present in the compound?
If both are present, fusion produces sodium thiocyanate (NaSCN). Adding iron(III) chloride (FeCl₃) to the acidified extract yields a blood-red coloration due to the formation of the ferric thiocyanate complex [Fe(SCN)]²⁺.
Q. Why is the sodium fusion extract alkaline in nature?
During fusion, unreacted sodium metal reacts with the distilled water upon extraction, producing sodium hydroxide (NaOH) and hydrogen gas, rendering the solution strongly alkaline.
Q. What happens if the fusion of sodium metal is incomplete?
Incomplete fusion fails to fully convert the covalent heteroatoms into ionic salts, leading to false-negative results during the chemical detection steps. Unreacted sodium may also react violently with water during extraction.
Q. Which organic compounds fail to give a positive nitrogen test in Lassaigne’s test?
Compounds containing nitrogen but lacking carbon (e.g., hydrazine derivatives) or compounds that readily lose nitrogen gas upon mild heating before reacting with sodium (e.g., diazonium salts, azo compounds) typically fail to yield a positive result.
MCQs
MCQ 1
1. Which of the following statements about the Sodium Fusion Test is INCORRECT?
A. Sodium acts as a reducing agent, converting covalently bonded heteroatoms into water-soluble ionic salts
B. The sodium fusion extract is acidic because excess sodium reacts with water to form sodium hydroxide ✓
C. Distilled water is used during extraction to prevent false positives from tap water ions
D. Compounds containing both nitrogen and sulfur form sodium thiocyanate (NaSCN) under standard fusion conditions
MCQ 2
2. Regarding the Prussian Blue Test for nitrogen detection, which statement is INCORRECT?
A. Freshly prepared FeSO₄ is boiled with the alkaline extract to form sodium hexacyanoferrate(II): Na₄[Fe(CN)₆]
B. Prussian blue forms because concentrated H₂SO₄ alone reliably oxidizes all Fe²⁺ ions to Fe³⁺ ions ✓
C. Hydrazine (NH₂NH₂) gives a false-negative nitrogen test because it lacks carbon to form NaCN
D. The Prussian blue color is due to formation of iron(III) hexacyanoferrate(II): Fe₄[Fe(CN)₆]₃
MCQ 3
3. Regarding halogen detection in the Sodium Fusion Test, which statement is INCORRECT?
A. The extract must be boiled with dilute HNO₃ before AgNO₃ addition to expel interfering CN⁻ and S²⁻ ions as HCN and H₂S gases
B. Silver fluoride (AgF) forms a white precipitate insoluble in NH₄OH, confirming fluorine just like chlorine ✓
C. Silver iodide (AgI) gives a deep yellow precipitate completely insoluble in ammonium hydroxide
D. Silver bromide (AgBr) gives a pale yellow precipitate that is only sparingly soluble in NH₄OH
MCQ 4
4. Regarding limitations and errors in the Sodium Fusion Test, which statement is INCORRECT?
A. Diazonium salts give false-negative nitrogen results because they decompose and release N₂ gas before sodium has fully melted
B. Using excess sodium is recommended to guarantee complete fusion and is therefore always a safer laboratory practice ✓
C. Highly volatile compounds like diethyl ether may escape the open fusion tube before reacting with molten sodium
D. Incomplete heating of the ignition tube to red-hot leads to incomplete covalent bond cleavage and false-negative results
MCQ 5
5. An organic compound is fused with sodium. The extract is treated with FeSO₄, boiled, cooled, then acidified — but only a faint greenish color appears instead of Prussian blue. Which is the MOST LIKELY cause?
A. Acetaldehyde is a solid at room temperature
B. Insufficient Fe³⁺ ions in solution due to incomplete oxidation of Fe²⁺ — FeCl₃ should be added separately ✓
C. The extract was not made alkaline before the FeSO₄ addition
D. The compound is a polysaccharide with no heteroatoms
MCQ 6
6. A chemist performs the Lassaigne test on compound X. After boiling with HNO₃ and adding AgNO₃, a pale yellow precipitate forms. On adding excess NH₄OH, the precipitate partially dissolves. What is the correct conclusion?
A. Chlorine is present — AgCl dissolves completely in NH₄OH
B. Iodine is present — AgI is insoluble in NH₄OH
C. Bromine is present — AgBr is sparingly soluble in NH₄OH ✓
D. Both chlorine and bromine are present simultaneously
MCQ 7
7. Compound Y contains nitrogen and sulfur. After sodium fusion, the extract is directly acidified with dilute HCl and FeCl₃ is added. A blood-red color appears. However, when the same extract is separately tested for sulfur using sodium nitroprusside, NO violet color forms. What is the most chemically accurate explanation?
A. The compound does not actually contain sulfur — blood-red was a false positive
B. Excess sodium was used, decomposing NaSCN into NaCN and Na₂S — the S²⁻ was lost as H₂S during acidification ✓
C. The nitroprusside reagent was added in excess, bleaching the violet color
D. Sulfur was converted to sodium sulfate (Na₂SO₄) instead of Na₂S during fusion
MCQ 8
8. Which combination of observations CORRECTLY and COMPLETELY identifies an organic compound containing nitrogen, sulfur, AND chlorine?
A. Prussian blue + blood-red color + white AgCl precipitate soluble in NH₄OH ✓
B. Prussian blue + deep violet nitroprusside + pale yellow AgBr precipitate
C. Blood-red color with FeCl₃ + canary yellow ammonium molybdate precipitate
D. Prussian blue + black PbS precipitate + deep yellow AgI insoluble in NH₄OH
MCQ 9
9. A student performs the sodium fusion test on nicotine (C₁₀H₁₄N₂ — contains N but no S, no halogens). She adds FeSO₄, boils, cools, acidifies with dilute H₂SO₄, but observes NO Prussian blue. She repeats the test twice with the same result. Which sequence of actions would MOST LIKELY solve the problem?
A. Add concentrated HNO₃ and repeat — the nitrogen needs oxidation before detection
B. Ensure the ignition tube was heated to fully red-hot, use freshly prepared FeSO₄, and add a separate drop of FeCl₃ after acidification
C. Add more sodium and re-fuse — nicotine is aromatic and requires excess sodium to break the ring
D. Replace H₂SO₄ with lead acetate solution — sulfuric acid destroys the cyanide complex
Further Reading & Resources
- Gower, R. P., & Rhodes, I. P. (1969). A review of techniques in the Lassaigne sodium-fusion. Journal of Chemical Education, 46(9), 606. https://doi.org/10.1021/ed046p606
- Ketcham, R., & Low-Beer, A. de G. (1961). A simple test for the detection of phosphorus in organic compounds. Journal of Chemical Education, 38(8), 414. https://doi.org/10.1021/ed038p414.2
- Singh, M. (2014). Extra elements detection in organic compounds by nonbreakable sodium ignition apparatus (NOSIA). Green Chemistry Letters and Reviews, 8(1), 1–7. https://doi.org/10.1080/17518253.2014.969330
- Sowa, J. R. (1989). An inexpensive Schoninger flask. Journal of Chemical Education, 66(11), 974. https://doi.org/10.1021/ed066p974
- Thiessen, G. W., Beck, K. M., & Smith, A. E. (1943). Detection of halides. Journal of Chemical Education, 20(11), 530. https://doi.org/10.1021/ed020p530
- http://www1.chem.umn.edu/groups/baranygp/puzzles/inorganic/sodium_fusion_j_chem_ed046p606.pdf
- https://www.youtube.com/watch?v=jERxoPjQEiA
Sodium fusion test and mass spectrometry
| Element | Sodium fusion test | Mass spectrometry |
|---|---|---|
| Nitrogen | Prussian blue | Odd m/z of molecular ion (nitrogen rule) |
| Sulfur | Violet with sodium nitroprusside | M+2 about 4.4% per S atom |
| Chlorine | White AgCl precipitate | M : M+2 = 3 : 1 |
| Bromine | Pale yellow AgBr precipitate | M : M+2 = 1 : 1 |
| Iodine | Yellow AgI precipitate | No M+2; peak at m/z 127 or loss of 127 |
Mass Spectrum Interpretation M+2 Peak: Chlorine and Bromine M+2 and M+4 Peak Calculator Isotopes of Elements Calculator
